VRF System Accessories

Select Your Model

vrp system vrp system vrp system

NOTE: These examples are for illustrative purposes. There are many ways to integrate YANMAR CHP, including BOS (Black Out Start), Multiple Unit Operation, Load Following, Reverse Power Protection, etc. Please consult with your YANMAR CHP representative to discuss integration options that work for your specific application and site requirements.

Flexible Installation Options

vrf system controller

FLEXIBLE SCHEDULING

Various calendar options are available to schedule system operation around holidays, vacations and peak demand.

SYSTEM OPERATING PARAMETERS

Allows you to decide on either electrical or heat operation to maximize your savings and benefits.

SYSTEM PERFORMANCE

Shows the performance of the system on the main screen.

ALARM MENU

Allows troubleshooting to be conducted off site by your YANMAR mCHP Dealer and YANMAR.

CONTROLS LEAD LAG OPERATION

Allows for systems to rotate on a daily basis. This guarantees that multiple units stay within 100 run time hours of each other to allow for synchronized service.

System Controller
More on System Controller
vrf system monitor

NOTIFIES SERVICE PROVIDER

Enables YANMAR mCHP Dealers to provide rapid service for system alarms.

REMOTE TROUBLE SHOOTING

Allows troubleshooting to be conducted off site by your YANMAR mCHP Dealer and YANMAR.

SEE THE SAVINGS

Allows you and YANMAR mCHP Dealers to optimize system operation, as well as calculate cost savings and greenhouse gas emission reductions over time.

MONITORS RUN HOURS

Signals YANMAR mCHP Dealer of when to schedule maintenance.

Remote Monitoring
More on Remote Monitoring
vrf system AC-800 Diaphragm Meter
AC-800 Diaphragm Meter

Diaphragm Gas Meter AC-800

vrf system AC/DC Power Cord
AC/DC Power Cord

Required AC/DC power cord for Remote Monitoring Adaptor Model ACDC24.

vrf system Air Direction Change Duct 10kW
Air Direction Change Duct 10kW

Optional Air Direction Change Duct 10 kW Model Model FKA10B. The Air Direction Change Duct is used to change the heat flow from the radiator in order to prevent a short circuit or other effects. In the CP10WN, it also protects the fan from damage such as snow.

vrf system Air Direction Change Duct 35kW
Air Direction Change Duct 35kW

Optional Air Direction Change Duct 35 kW Model FKA35B. The Air Direction Change Duct is used to change the heat flow from the radiator in order to prevent a short circuit or other effects.

vrf system Air Direction Change Duct 5kW
Air Direction Change Duct 5kW

Optional Air Direction Change Duct 5 kW Model FKA5B. The Air Direction Change Duct is used to change the heat flow from the radiator in order to prevent a short circuit or other effects.

vrf system Anti-Salt Paint
Anti-Salt Paint

Required if within a 1/2 mile of salt water. Anti-Salt Paint Model R.

vrf system Anti-Vibration Mount 10kW
Anti-Vibration Mount 10kW

Optional Anti-Vibration Mount 10 kW Model BKC10B1. The Anti-Vibration mount is used to prevent vibration from the CHP from reaching the building, and to reduce the noise level cause by vibration. Installation is necessary when the unit is installed on a roof, indoors in an area with rooms/floors underneath or in certain basements.

vrf system Anti-Vibration Mount 35kW
Anti-Vibration Mount 35kW

Optional Anti-Vibration Mount 35 kW Model BKC35C. The Anti-Vibration mount is used to prevent vibration from the CHP from reaching the building, and to reduce the noise level cause by vibration. Installation is necessary when the unit is installed on a roof, indoors in an area with rooms/floors underneath or in certain basements.

vrf system Anti-Vibration Mount 5kW
Anti-Vibration Mount 5kW

Optional Anti-Vibration Mount 5 kW Model BKC5D. The Anti-Vibration mount is used to prevent vibration from the CHP from reaching the building, and to reduce the noise level cause by vibration. Installation is necessary when the unit is installed on a roof, indoors in an area with rooms/floors underneath or in certain basements.

vrf system Current Transformer 200A
Current Transformer 200A

Optional Current Transformer 200A Model CT200/5A.

vrf system Current Transformer 400A
Current Transformer 400A

Optional Current Transformer 400A Model CT400/5A.

vrf system Current Transformer 600A
Current Transformer 600A

Optional Current Transformer 600A Model CT600/5A.

vrf system Exhaust Pipe Extension Joint 10kW
Exhaust Pipe Extension Joint 10kW

Optional Exhaust Pipe Extension Joint 10 kW Model EKC10W. The Exhaust Pipe Extension Joint is used to extend the flue pipe easily and correctly. This accessory is required for indoor installations and outdoor installations if the exhaust gas needs to be led to a specific location.

vrf system Exhaust Pipe Extension Joint 35kW
Exhaust Pipe Extension Joint 35kW

Optional Exhaust Pipe Extension Joint 35 kW Model EKC35W. The Exhaust Pipe Extension Joint is used to extend the flue pipe easily and correctly. This accessory is required for indoor installations and outdoor installations if the exhaust gas needs to be led to a specific location.

vrf system Exhaust Pipe Extension Joint 5kW
Exhaust Pipe Extension Joint 5kW

Optional Exhaust Pipe Extension Joint 5 kW Model EKC5W. The Exhaust Pipe Extension Joint is used to extend the flue pipe easily and correctly. This accessory is required for indoor installations and outdoor installations if the exhaust gas needs to be led to a specific location.

vrf system Grid-Tied Inverter SMA Sunny Boy 5000US
Grid-Tied Inverter SMA Sunny Boy 5000US

Required SMA Grid-Tied Inverter SB5000US.

vrf system Grid-Tied Inverter SMA Windy Boy 5000
Grid-Tied Inverter SMA Windy Boy 5000

Required SMA Grid-Tied Inverter WB500.

vrf system Heater Kit 10kW
Heater Kit 10kW

Required if in a cold area below 40 degrees Fahrenheit. Heater Kit 10 kW Model HHC10W.

vrf system Heater Kit 5kW
Heater Kit 5kW

Required if in a cold area below 40 degrees Fahrenheit. Heater Kit 5 kW Model HHC4W. The Heater Kit is used in cold areas to warm the inside of the CHP and engine block, as well as prevent water from freezing for smooth start up.

vrf system Itron A Series Gas Meter
Itron A Series Gas Meter

Optional Itron A Series Gas Meter Model GMC-400A-NTC-10-30LT.

vrf system Multicluster MLB-12U Box
Multicluster MLB-12U Box

Optional SMA Multicluster Box Model MLB-12U.

vrf system Neutralizer DFB19E
Neutralizer DFB19E

Optional Neutralizer Model DFB19E.

vrf system Off-Grid Inverter SMA Sunny Island 4548
Off-Grid Inverter SMA Sunny Island 4548

SMA Off-Grid Inverter SI4548. Required for Blackout Start models.

vrf system Optional Transducer
Optional Transducer

Optional Transducer for CP5/CP10 Models XL5C1-1/2A4-1-RS.

vrf system Optional Transducer
Optional Transducer

Optional Transducer for CP35D1 Model XLGW30S4-A1.

vrf system Piggyback Board MC-PB
Piggyback Board MC-PB

SMA Piggyback Board MC-PB. Required with Multicluster Box.

vrf system SMA Communications Board
SMA Communications Board

Required Communications Board SMA Model 485USPB-NR.

vrf system System Controller Wall Mount
System Controller Wall Mount

Optional Wall Mount for System Controller LKC10B3. Model RKC20C.

vrf system Transformer for CP35D1Z
Transformer for CP35D1Z

Required Transformer for CP35D1Z (Blackout Start).